K&N Air Intake Kit Give Dodge Ram 2500 and 3500 Diesels Gain of Around 20.63 HP

In the world of pickups, some models are the behemoths of the full size diesel truck world.  Buyers in need of serious hauling and muscle can turn to the Dodge Ram 3500 and 2500 series.

K&N has developed an air intake system (57-1557) for 2007, 2008 and 2009 Dodge Ram 2500 & 3500 pickups with 6.7 liter diesel engines.  K&N dynamometer testing shows a 20.63 horsepower gain at 2500 rpm and a 43.35lbft gain of torque @ 2500 rpm. This is more than a 10 percent increase in torque over the original intake for improved towing and passing power.

K&N's 57-1557 air intake system for 2007, 2008 and
2010 Dodge Ram 2500 and 3500 along with diesel models

The 57-1557 features a specially molded intake tube and a K&N lifetime replacement filter (RC-5142). The K&N washable and reusable air filter provides increased surface area and dust capacity. The K&N air filter is made of six layers of cotton gauze sandwiched between two epoxy-coated aluminum wire screens. The nature of the cotton allows high volumes of airflow and exceptional filtration efficiency. With proper care diesel motors typically last much longer than gas motors. This K&N air filter provides outstanding filtration efficiency to ensure you get the protection your diesel motor needs.

Our air intake system includes a powder coated steel heat shield which isolates the K&N air filter from engine heat.  It has lower restriction than the factory air box which results in additional power and torque when you need it.

The 57-1557 is designed so the mass air sensor will work with factory stock settings. This means there is no need for re-programming to run our air intake system.

Designed to be installed in 90 minutes or less with simple hand tools, our K&N air intake systems are backed by the famous K&N Million Mile Limited Warranty. Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Increase Honda Accord Performance for 2.4L Models with AEM Cold Air Intake

The Honda Accord has been one of the most popular cars in the United States since 1989. With so many Honda Accord Coupe and Sedan models on the road it’s no wonder that owners are searching for a Honda Accord performance upgrade by installing a cold air intake system. The ninth generation 2013, 2014, and 2015 Honda Accord comes standard with a direct injected Earth Dreams 2.4-liter 16-valve DOHC four-cylinder engine rated at 185 horsepower. Honda Accord Sport models make a little more power, and when mated to the 6-speed manual transmission can be a fun, yet practical, car to drive.

The standard engine for 2013, 2014, and 2015 Honda Accord 2.4L LX, EX, EX-L, LX-S, and Sport models is a 2.4L i-VTEC DOHC inline four cylinder engine with direct injection

2013, 2014, and 2015 Honda Accord 2.4L LX, EX, EX-L, LX-S, and Sport model owners looking to add more power with an original equipment quality part and without breaking the bank are able to do so with an AEM cold air intake. By reducing air intake tract restriction, and turbulence, AEM is able to increase horsepower, torque, acceleration, and provide better engine sound with the installation of an AEM CAI system. The 2013-2015 Honda Accord 2.4L air intake system relocates the AEM Dryflow synthetic air filter outside of the engine compartment by replacing factory components with a charcoal gray powder coated aluminum cold air intake tube to provide cooler, denser outside air for more efficient combustion. More efficient combustion, combined with reduced airflow restriction, results in better Honda Accord performance.

The Honda Accord cold air intake design for 2013, 2014, and 2015 2.4L models is designed to improve horsepower and torque delivery in a usable RPM range compared to the factory air filter box system. On the dyno, a 2013 Honda Accord 2.4L and a manual transmission equipped with AEM CAI 21-747C made an estimated additional 7.0 horsepower and a more impressive 10 lb-ft additional torque at a commonly used 3,700 RPM . In addition to increasing horsepower, lowering air intake tract restriction and increasing airflow will improve acceleration, drivability, and give your ninth gen Honda Accord 2.4L a sportier engine sound.

At AEM Induction Systems our engineers design our intake systems as a fully integrated component of the vehicle. Improved airflow is only part of the power equation. This AEM cold air intake comes equipped with a non-oiled AEM Dryflow air filter 21-2027DK, which delivers high airflow, excellent filtration, and exceptional engine protection. The mandrel bent aluminum cold air intake tube is finished with a durable charcoal gray powder coat finish to provide long lasting good looks.

The 2013, 2014, and 2015 Honda Accord 2.4L performance AEM cold air intake system is an excellent performance upgrade for the ever popular Accord Sedan or Coupe. This is a complete Honda Accord cold air intake system including all the necessary hardware and step by step installation instructions. To provide peace of mind, AEM Induction Systems stands behind its products with a Lifetime Limited Warranty.

The AEM Cold Air Intake for 2013-2015 Honda Accord Coupe or Sedans with the 2.4L engine relocates the air filter outside of the engine compartment for cool, dense air

The 21-747C AEM cold air intake system will provide increased Honda Accord performance and excellent engine sound for the following vehicles:

2015 Honda Accord 2.4L L4
2014 Honda Accord 2.4L L4
2013 Honda Accord 2.4L L4

Use the Search by Car or Truck tool to find additional Honda Accord performance products from AEM or other vehicles. To find an AEM dealer near you, use Search for AEM Dealer or simply visit AEMintakes.com.