2008 Pontiac Solstice and Saturn Sky 2.0L Get Additional 10+ HP with K&N Cold Air Intake

Pontiac Solstice 2.0L Turbo with K&N Cold Air Intake

The Pontiac Solstice upon its release has boasted impressive styling, highly respectable performance, and excellent control, all for an economical budget. This model was Pontiac's first design of a two-seater roadster and with its formidable ingredients of a powerful front-mounted engine, rear-wheel drive, a fully independent suspension, 18 inch wheels and a near perfect weight distribution. This vehicle has certainly gained drivers' attention. The Pontiac Solstice 2.0L Turbo adds to this repertoire of performance features by increasing acceleration and power, turning this economical compact into a top-down road-ripping machine.

K&N has released a newly engineered Typhoon Cold Air Intake System (69-8433TTK) for the 2008 Pontiac Solstice 2.0L Turbo to boost its already impressive performance. This cold air intake also fits the 2008 Saturn Sky with 2.0 liter engine. This intake has a free-flowing mandrel-bent aluminum tube with a black powder coated finish. This K&N cold air intake systems replace your vehicle's restrictive factory air filter and air intake housing, replacing it with a precisely designed intake and filter assembly for outstanding performance and a great horsepower gain. As in all K&N cold air intakes, the new 69-8433TTK is designed to dramatically reduce intake restriction resulting in additional power and torque.

The 69-8433TK cold air intake system redirects the intake filter to deep along the passenger side of the engine compartment allowing it to draw in cooler air for better performance. By isolating the filter, fresher, outside air can enter your air filter resulting in more power.

K&N cold air intake 69-8433TTK is specially designed to increase horsepower in the 2008 Pontiac Solstice and the 2008 Saturn Sky with 2.0 liter engines while providing outstanding engine protection. Dyno testing for the Pontiac Solstice revealed an additional gain of 10.98 HP @ 4900 RPM.

Installing a power gaining air intake system on your Pontiac Solstice is much easier than many would think. A typical installation takes less than 90 minutes and requires common hand tools, and K&N provides detailed installation instructions which make adding more horsepower quick and simple.

2011 and 2012 Dodge Charger and Challenger and Chrysler 300 Get Performance with K&N Cold Air Intake

K&N Cold Air Intake for Dodge Charger/Challenger and Chrysler 300

Not many consumers can argue that Dodge has finally found a way to make stylish cars. Let's face it a 1969 Dodge Charger was not the best looking muscle car of its time. Moving forward to 2011, Dodge really has something brilliant going here with their cutting edge designs that speak to their muscle car roots. If one were to compare a 1960's Dodge Challenger alongside a 2011 Dodge Challenger, the resemblance is clear.

The 2011 model offers excellent engine packages. One option in particular is the base model package that comes with fuel efficient, yet powerful, 3.6L V6 that pushes out around 290 horsepower and achieves an average of 27 miles per gallon.

During the muscle car era it was all about going faster with what was available to you. Many gear heads had to find new ways to make a few extra horsepower. While today the goal remains the same, there are more options available to car enthusiasts. One modification many consider a fairly affordable way to increase performance is by replacing the factory intake system with an aftermarket replacement. If this is something you may be interested in, K&N, the world leader in air filtration technology, has you covered.

K&N cold air intake 69-2544TP was developed specifically for the 2011-2012 Dodge Charger, Dodge Challenger, and Chrysler 300 with the 3.6L engine. This Typhoon cold air intake system comes equipped with all the necessary components required to help your engine breath better. This intake system includes a K&N high flow air filter, an intake pipe with a chrome like finish, a heat shield, and a hardware package with detailed installation instructions.

Every K&N cold air intake system, including 69-2544TP, is tested to fit and function properly on specified applications. Of course power testing is important with any air intake design. First a test is run to show the rear wheel horsepower of a completely factory 2011 Charger with a 3.6L. A second test is run with the same vehicle after installing the intake. After lengthy testing the 69-2544TP cold air intake showed an estimated 7.92 horsepower gain on the K&N in-house dyno.

If you are looking for a quality product that will last you a lifetime, 69-2544TP is definitely something you should consider. This intake system comes backed by the famous K&N Million Mile Limited Warranty. The K&N air filter is washable and reusable but you won't need to do that for up to 100,000 miles depending on driving conditions. This system allows air to flow into your engine with little restriction for more performance while protecting your engine from harmful contaminants.

2012 and 2013 Toyota Tacoma with 4.0L V6 Engine Gains Horsepower with K&N Cold Air Intake System

Toyota Tacoma with K&N Cold Air Intake

The 2012 and 2013 Toyota Tacoma has a reputation for having a strong build quality, possessing amazing reliability and because of its smaller size making it easy to get around, the Toyota Tacoma can be placed on par with many of its full-size competitors. Then when you add in the optional 236 horsepower 4.0L V6 engine, this truck really stands out. With everything that makes this truck amazing wrapped into one package, K&N has produced a way for owners to make this truck just a little bit more awesome with the 63-9037 cold air intake system.

K&N's 63-9037 cold air intake system is designed to be easily installed with a few simple tools and a little time. The 63-9037 air intake system comes with all of the required components needed to bolt on an additional estimated 8.6 horsepower at 5100 RPM and 8.5 ft-lb or torque at 3700 RPM to this bad boy without modification to the body or engine bay.

Cold air intake 63-9037 comes with an aerodynamic air intake tube that is engineered specifically for the Toyota Tacoma V6's computer and mass air sensor setup so the stock mass air sensor can be transferred without hassle or the need to reprogram the computer. The other main components include the K&N RF-1042XD high flow air filter and a powder coated heat shield. The heat shield is designed to help keep the nice outside cold air that helps the engine perform from being heat soaked by the hot under hood temperatures. In addition, the air intake system also comes with application specific brackets, crank case vent hose and fitting, as well as all of the hoses, hose clamps and hardware needed to install.

The major benefit of the K&N reusable air filter is that it's designed with K&N's highly efficient oiled cotton media, meaning that this air filter will do the job that is needed to protect your engine from harmful dust in the air. Due to the design of the RF-1042XD air filter, drivers can go up to 100,000 miles between cleaning, depending on driving conditions. To clean the RF-1042XD air filter just follow the 4 easy cleaning steps or watch the cleaning video. If you dive in dustier than normal conditions and find that you need to clean the air filter more often, then K&N also offers the RF-1042DK (black), the RF-1042DL (blue), the RF-1042DY (yellow) and the RF-1042DR (red) air filter wraps. These wraps will extend the filter's service life while adding little additional restriction.

In addition to the high quality and long lasting components, the K&N 63-9037 cold air intake system is backed by K&N's Million Mile Limited Warranty, meaning that your intake should last for the life of your vehicle.